Frequently Asked
Questions
Service Options
FAQs
Sign Up FAQs
Billing FAQs
Payment FAQs
Rates FAQs
o Service
Options
FAQs
^top
AUTOMATIC
option
Q: What is "Automatic"
option? A: This is also described as
"Pre-Select" by many service providers. With Automatic option
you place calls exactly as you would using your primary service
provider (eg Telstra, or Optus). Your local calls will still be
processed by your primary service provider, but all STD,
International and calls to mobiles will be connected and billed
by Call$ave, because your service has been programmed for
this.
Automatic option is easiest to use as you do not have to
remember to enter 1414 before the number you dial. It is the
best selection for business users particularly.
ALTERNATE
option
Q: What is "Alternate"
option? A: This is often described by other
service providers as "over-ride". You place calls by first
dialling 1414 followed by the number you wish to call. This
gives you a choice between using your primary service provider
(eg Telstra, or Optus) or Call$ave to place particular calls.
If you have Alternate service option, and dial normally, your
primary service provider will process and bill the call to you.
If you want Call$ave to process and bill the call, just enter
1414 before your destination number. This option allows you to
take advantage of special seasonal or promotional offers if
they are available from your primary provider.
Q: What do I do to place a
call? A: Placing a call with Alternate
option is no different to your usual Telstra/Optus service. All
you do that's different, is to enter "1414" before the
destination number. Here are (fictitious) examples:
-- for an STD call -- 14140299991111
-- for an IDD call -- 1414001164913246578
-- to a mobile -- 14140428111222
Q: Will it mean I can't use my
existing service for local calls?
A: No. You can still make local calls. Call$ave Alternate is an
additional service to what you already have. This means you
continue to use your existing service(s) for line rental and
local calls.
o Sign
Up
FAQs
^top
Q: Will service be available from
my phone?
A: Service is available from any tone dial landline phone in
Australia. Call$ave service is not available from a mobile
'phone.
Q: Will I need to have new
equipment connected?
A: No new equipment is necessary - you use your existing
handsets and connections.
Q: How do I arrange for
Call$ave service? A: You will need to
complete an application form. This typically processed and
approved within 12 - 24 hours (see earlier question about
this).
To apply for Call$ave service, click here
Q: Are there any minimums,
sign up, or monthly fees? A:NO. Call$ave
does not set a minimum usage. However, unless you are spending
more than ten dollars a month on calls, the savings you would
make using our service, are hardly worthwhile. There is no sign
up fee payable and we do not charge any sort of monthly fees to
use our services where you are paying by credit card or
security deposit. You pay only for the cost of your calls.
Exception: To defray administrative costs, 21
day account
customers are charged a minimum $10 monthly
where the actual usage is less than $10.
Q: How will I know when
service has started?
A: As soon as everything necessary has been done and your
service is available, we send you an email Service Connection
Advice. This sets out all the information you need to use your
service.
Q: Where can I call using the
service?
A: You can place calls within Australia (STD), internationally
(IDD), and to mobile telephones. However, you must first have
STD and/or IDD enabled by your primary service provider (eg
Telstra or Optus). Local call service is not available from
Call$ave.
Q: How do I report service
problems? A: Service problems should be
reported as quickly as possible, ideally within 12 hours of the
event. They need to be in writing and can be advised by email
or fax. Because we handle many thousands of calls each day
through the switch, delay in reporting problems can make faults
impossible to identify unless we can trace and duplicate them
quickly. You can Report a Service
Problem here
Q: How long will it take to
activate Call$ave service? A: Typically you
should allow 12 - 24 hours from when we receive your
application to set up Call$ave service. This time includes
checking information provided in your service application.
However, applications received late on a Friday will usually be
confirmed on Monday next. It is important, to avoid delays in
setting up your service, that you fully complete your
application form.
Q: Do I have to use the
service every month?
A: No, you use the service as you require it. If you do not
need to place calls in any month, you will not be billed in any
way. You are only charged the cost of calls you make at any
time
Q: What happens if I don't use
Callsave for three months or more?
A: Nothing will happen if you do not use your service in any
three month period. We will likely contact you to check you
still require service some time after that. Normally, if after
no use in a six month period, we will suspend or cancel service
depending on your call history. If you need us to reinstate
service where that has happened, simply give us a call or send
us an email to resume service.
Q: Do I have to cancel service
when I no longer need it?
A: There is no compulsion or penalty in this. We do appreciate
the courtesy however, as it helps us keep up to date with our
customer requirements, and it means we will no longer trouble
you sending out updates and service news.
o Billing
FAQs
^top
Q: When will I get my
bill? A: Billing is done typically within
the first few days in each month and lists calls made during
the previous calendar month. Your Account Summary is emailed to
you or posted as soon as billing is completed.
Q: Who bills
me? A: You will be billed by Call$ave for
all calls made using the service. If you use several of our
services, these are all combined on the one monthly bill.
Q: Do I get full details of my
calls? A: Yes. Your Account Summary shows
all information about your service. It lists all calls made by
each Access Number you have. (Some customers have several
Access Numbers, for different locations). Each call record
shows date and time of call (in local time), the originating
telephone number, the number called, country or location
called, number of minutes, rate, and call cost. The total
amount per Access Number is shown for that location (in
accordance with Call$ave Rate Sheet). The total(s) for Access
Number(s) is summarised as Total Charges for the billing
Month.
Q: How are my calls
charged? A: You are charged for all
connected calls. If you connect to an answering machine, fax,
service message, or mis-dialed number, you will be charged for
such connected calls. Calls are charged a minimum 30 seconds,
then in six second increments (1/10th of a minute) thereafter.
Full details of all your connected calls are given on your
monthly bill.
Q: How is my bill made
up? A: Billing is fully computerised and
made up from call data supplied by our carriers with itemised
records of the calls made by you. This raw data is checked by
our programs to remove data for unconnected calls and other
anomalies. Whilst we make every effort to ensure accuracy of
the billing, with the thousands of calls processed, mistakes
can occur. We rely on our customers to check their bills and to
advise us where they consider a mistake may have been made. We
have no way of determining a "good" call from a "bad" call,
unless you tell us.
Q: What do I do if I think you
have made a mistake in my bill?
A: Mistakes can happen despite our care in making up your bill.
We always recommend you keep a note of calls you have made and
check these against the bill. If you think there is an error in
your bill, send us an email, fax, or letter setting out where
and why you think we have made a mistake. We will check with
switch and carrier records and establish if an error has been
made. If so, you will receive a credit in your next bill. You
will always be advised the result of your claim. Claims must be
made in writing within 30 days of invoice date.
Q: My bill shows more fax time
used than my fax transmission log.
Why?
A: Your transmission log will only show the actual time taken
to send the fax. It does not include the time taken to initiate
a "handshake" with the recipient fax nor for the disconnect
procedure after the transmission is received. These are part of
the overall connect time and chargeable according to common
practice with all Telecommunications companies world-wide.
Q: I made a call and reached
an answering machine and did not talk but you have charged me
for the call. Why? A: You are charged for
all connected calls. That is, when a connection is made between
you and the dialed number, regardless if this is what you
intended. This means you will be charged where you reach an
answering machine, fax tone, data accept, or public message
where a charge is involved.
Q: How is a connected call
defined?
A: A connected call is determined in one of two ways. In
countries where Answer Supervision is used by the Telco
authority, our carriers rely on the confirmation from the
authority that a call has connected - detected as either audio
or electronic tone signalling. Where Answer Supervision is not
available, or does not verify an answer, then our switch
assumes that any call connected is a valid call. For this
reason, we recommend you do not "hold" too long awaiting an
answer - it is better to hang up and try again later.
Q: When am I
billed? A: You will be billed as quickly as
we receive call records from the switch(es) involved in
processing your calls. This is typically before the 6th day of
the month following your calls. If you have an email address we
will send you an HTML invoice by email. If you do not have an
email facility, we will mail your invoice.
Q: How are calls within
Australia timed for billing?
A: Each call is charged a connection fee. You are then charged
a minimum 30 seconds for any call. Calls longer than 30 seconds
are charged at six second increments (one tenth of a minute)
thereafter. The rate per minute you are charged will depend on
the type of connection (ie, STD,to mobile), the destination of
the call.
Q: How are calls to overseas
countries timed for billing?
A: A connection fee (flagfall)is charged for each call. Billing
is then a minimum 30 seconds for any call, and in six second
increments (one tenth of a minute) thereafter. You will be
charged at a flat rate per minute for overseas calls,
regardless time of day.
o
Payment
FAQs
^top
Q: When is my credit card
debited?
A: Credit card authorisation is due on demand. Your credit card
may be debited when call charges amount to $100, or at any time
interval decided by Callsave. For the average account, credit
cards are typically debited in the first few days of each
month.
Q: Are there any monthly
minimums to pay? A:NO. Call$ave does not set
a minimum usage. However, unless you are spending more than ten
dollars a month on calls, the savings you would make using our
service, are hardly worthwhile. There is no sign up fee payable
and we do not charge any sort of monthly fees to use our
services where you are paying by credit card or security
deposit. You pay only for the cost of your calls.
Exception: To defray administrative costs, 21 day account
customers are charged a minimum $10 monthly where the actual
usage is greater than $0 but is less than $10.
Q: Is my deposit amount
refundable, when I no longer need the
service? A: Once we have established there
are no outstanding call charges, the balance remaining is
refunded. Usually within 6 days of end of month. If you paid
your deposit by credit card, we will credit the balance to your
card. Otherwise by direct credit to your bank account.
Q: Will there be any charges
deducted from my deposit amount at the time of
remittance?
A: There are no charges associated with a bank cheque or credit
card payment.
Q: Can I make a payment direct
to your bank account? A: Yes, our bank
account details are as follows:
Account Name - Callsave Pty Ltd
Bank - Westpac, Loganholme, Queensland
BSB - 034264 Account Number - 116897
Please be sure to let us know you have made a payment, with
your Customer Code, the amount paid, and Invoice Number. You
can do this by 'phone, fax or email.
o Rates
FAQs
^top
Q: How often do you review rates,
and how do I learn about this? A: Call$ave
is constantly reviewing rates. In respect of International
destinations, reductions in rates are possible in relation to
the amount of calls to each country and Call$ave ability to
negotiate better carrier charges. As specific country rates are
reduced (or sometimes, increased) we usually notify you with
your billing cycle. When rate reviews are made you will be
notified prior to them coming into effect. We also post new
rates to our website as they occur.
Q: How long will current rates
last? A: Rates are current from the date
shown on our current rate sheet. Call$ave reviews rates often.
We notify you prior to any rate changes. However, we recommend
you check rates also on our website.
|